🚚 Free Shipping on Orders Over $200

Cart

Your cart is empty

Continue shopping

MOOV REVERSIBLE ON/OFF HEAT PUMP 55K BTU

$1,999.00
  • Brand: Moov

A traditional heat pump unlike its big sister, the Moov Inverter. This heat pump runs on a world-renowned single-speed compressor. Its mission is to heat your pool as much as the weather conditions permit, while offering an impressive level of silence and unrivalled value for your money. In northern climates where temperatures can reach 10°C at the beginning and end of the season, a heat pump with reversible defrosting is imperative.

Specifications
Product Code MR550X
Manufacturer Moov Pool Products
UPC 628425350069
Type Single-speed (on/off) pool heat pump with reversible-valve defrost
Heating Capacity 55,000 BTU
Voltage 208–230 V
Frequency / Phase 60 Hz / 1 Ph
Circuit Breaker 30 A
Heating Current (air 80°F, water 80°F) 10.8 A
Heating Power (air 80°F, water 80°F) 2.3 kW
Heating Current (air 80°F, water 95°F) 13.2 A
Heating Power (air 80°F, water 95°F) 2.7 kW
Compressor RLA / LRA 11.6 A / 60.2 A
Fan Motor Rating 0.5 A
Refrigerant R410A, 56 oz
Design Pressure High ≤609 PSIG, Low ≤261 PSIG
Water Circulation Flow 83–116 L/min
Water Inlet and Outlet 1½"
Noise ≤50 dB(A)
Waterproof Class IPX4
Operating Air Temperature 32–109°F
Net Weight 67 kg (148 lb)
Dimensions 39.4 × 15.7 × 26 in
Key Features
  • Single-speed (on/off) international brand compressor
  • Reversible-valve defrost — the unit runs in the reverse direction for accelerated defrosting at low temperatures
  • Spiralled titanium heat exchanger, which Moov states provides 30% more heating area
  • Dual rotary compressor: two rotors operate together to balance the rotary shake, for increased efficiency and quieter operation
  • Smart control thermostat with Wi-Fi option
  • Improved soundproofing — the mechanical chamber is reinforced with sound-absorbing pads
  • Environment-friendly R410A refrigerant
  • High-pressure, low-pressure and water-flow protection systems
  • Exceeding-low-temperature auto stop protection
  • Sensitive, accurate temperature control with water temperature display
How to Use
  1. The heat pump must be installed by a professional technician — depending on region this may be an HVAC technician or an electrician. Installing it otherwise voids the warranty.
  2. Install outdoors in a well-ventilated location, with the frame bolted (M10) to a solid concrete foundation or a strong, rust-treated bracket.
  3. Leave at least 50 cm clear behind the unit and keep nothing stacked near the air inlet or outlet, or heating efficiency will drop or stop.
  4. A separate circulation pump is required (supplied by the user); refer to the water flow figure above, with a maximum lift of at least 10 m.
  5. Fit the supplied drainage nozzle into the hole under the unit and pipe the condensation away.
  6. Always start the pump before the heat pump, and turn the heat pump off before the pump. The blower runs 3 minutes before the compressor on start-up.
  7. If the unit is stopped for a long period or over winter, cut off the power supply and drain the water out of the machine by opening the inlet pipe tap.
Warranty

Moov states 3 years labour, 3 years parts and 5 years on the heat exchanger. The warranty begins at the time of purchase and is valid only on first install. Moov will not approve claims for heat exchangers broken by improper winterisation, damage from meteorological "act of god" events, units not installed by an appropriate technician, or dissatisfaction with efficiency.

Additional Information

Moov's head office is in Quebec City, Quebec. This is the single-speed unit in Moov's range; the Moov Inverter (MI series) is the full-inverter, variable-speed alternative.

Can be back ordered — most arrive in 1–4 weeks.